 |
 |
 |
 |
 |
 |
||||
Behringer ADA8000 Ultragain Pro-8 |
|
The perfect expansion for any recording studio. The Behringer Ultragain Pro-8 is an 8 channel converter with Mic preamps and ADAT Interface. The AD and DA converters are 24-bit and run at either 44.1 kHz or 48 kHz sample rates. The mic Preamps inputs use 1/4" TRS connectors while the outputs use XLR connectors. The mic inputs also come with +48Volt phantom power so you can connect it directly to any condenser mic. The ADA8000 is made for digital audio recording to and from a computer but the unit can interface with any ADAT compatible device. All this is put in a single compact rackmount case. Synchronization can be made using the ADAT interface or by way of WordClock. You can monitor the inputs with the LEDs that are placed near each input channel. The Behringer Ultragain Pro-8 is a high-end 8 channel A/D and D/A converter with premium Mic preamps and ADAT Interface. It consists of 8 channels of High Quality 24-bit A/D and D/A conversion using the ADAT interface. It has 8 Mic Pre-Amp inputs (TRS) and 8 Outputs (XLR) with Phantom Power on the inputs that will work in virtually any digital recording and mixing environment. The converters run at either 44.1k or 48k samplerates. The ADA8000 also can synchronize to WordClock. There is also an LED display for easy monitoring of the input signal. The ADAT inputs and outputs can be used separately if you sync to the same clock source using WordClock. This way you can receive input data from a computer that uses ADAT lightpipe. This computer can be loaded with VSTi synths or other digital audio application. You can also connect the Behringer ADA8000 ADAT output to another computer or ADAT interface. The number of possible combinations is limitless. All of this is done in the digital domain with no signal loss. Features
|
|
|
|
