Peavey 5150 Amp
EVH 5150 III HD
This is the latest version of the 5150 by EVH. It's a switchable 3 channel all tube amp with 100 watts of power. It's design for use with the 5150III 4/12 Enclosures but can output to 4, 8, or 16 ohm cabinets. It uses (4) 6L6 power tubes and (6) 12AX7 preamp tubes. Each of the three channels have: Gain, Low EQ, Mid EQ, High EQ, Presence, and a channel select. It includes a four button footswitch.
|
As with all Peavey 5150 amps they have the Brown sound - a smooth crunch sound along with great lush harmonics. The Peavey 5150 Combo amp is a combination of the Peavey 5150 amp design with two 12" Sheffield 1200 speakers. The amp features 60 watts RMS and is voiced to EVH specs. This is the same specifications used in his amps. The preamp section consists of five 12AX7 preamp tubes and two 6L6 power amp tubes. The preamp section has two channels: a Rhythm channel and lead channel. The Rhythm channel has both PRE and POST gain controls. It also has bright and crunch switches. The lead channel consists of PRE and POST gain controls so you can get any sound between ultra-clean to molten lead tube sound. The 5150 Combo also has a 3-band EQ (global) as well as Presence and Resonance controls. There is also an Effects Loop post-EQ as well as a preamp out for connecting to another amp or for recording. The speaker cabinet is of the closed back design and consists of Two Sheffield 1200 12" speakers that have been voiced to Edward Van Halen's specs. The Footswitch is included.
Features
- 60 Watts RMS
- Five 12AX7 preamp tubes
- Two 6L6GC power tubes
- HI and LO Gain Inputs
- 2 channel preamp
- PRE and POST gain Controls on both channels
- Bright & Crunch Switches
- 3-band EQ
- Presence and Resonance Controls
- Post-EQ effects loop
- Preamp output
- Footswitch included
Peavey 5150 Guitar Amp Head
Peavey's Brown sound amp that has a smooth crunch sound along with great lush harmonics. The Peavey 5150 guitar amp was designed with the help of EVH. The 5150 guitar head comes with five 12AX7 preamp tubes that produce some of the most "Eruptive" sonic rock sounds you'll ever hear come out of an amp. I heard him play at the NAMM show and was obviously quite impressed with his playing but also with the sound of the amp. If you haven't tried a peavey amp lately you should at least try out the 5150 series. This amp is the same amp that EVH uses while recording and on tour. The amp has 120 watts (true RMS) that can drive 16, 8, or 4 ohm speaker cabinets. As mentioned it has five 12AX7 tubes in its preamp section as well as four 6L6 power amp tubes. The front panel has two inputs one for high gain and the other for low. The preamp section is broken down into two channels that can be switched on the amp or by using a footswitch. The Rhythm channel has both PRE and POST gain controls that allow you to dial-in the any amount of molten lead that you want. There is also a bright and crunch switch for switching between a normal and a bit more crunch sound. The lead channel also has PRE and POST gain controls and both channels share a 3-band Equalizer, presence and resonance knobs. The EQ has an effect LOOP so you can insert effects after the EQ. There is also a PREAMP out for connecting to another amp or for recording directly into a recording console.
Features
- 120 Watts RMS
- Five 12AX7 preamp tubes
- Four 6L6GC power tubes
- HI and LO Gain Inputs
- 2 channel preamp
- PRE and POST gain Controls on both channels
- Bright & Crunch Switches
- 3-band EQ
- Presence and Resonance Controls
- Post-EQ effects loop
- Preamp output
- Footswitch included
Peavey 5150 II Guitar Amp
Did you know that Edward Van Halen owns the trademark on "5150"? The version II amp is voiced to EVH specs. This along with an extra Preamp tube provide you with an even better and more versatile 5150 guitar head. This amp comes with six 12AX7 preamp tubes for even more subtle harmonic changes. Peavey has actually improved on the original. This amp is the same amp that EVH uses while recording and on tour. The amp has 120 watts (true RMS) that can drive 16, 8, or 4 ohm speaker cabinets. As mentioned it has SIX 12AX7 tubes in its preamp section as well as four 6L6 power amp tubes. The front panel has two inputs one for high gain and the other for low. The preamp section is broken down into two channels that can be switched on the amp or by using a footswitch. The Rhythm channel has both PRE and POST gain controls that allow you to dial-in the any amount of molten lead that you want. There is also a bright and crunch switch for switching between a normal and a bit more crunch sound. The lead channel also has PRE and POST gain controls and both channels share a 3-band Equalizer, presence and resonance knobs. The EQ has an effect LOOP so you can insert effects after the EQ. There is also a PREAMP out for connecting to another amp or for recording directly into a recording console.
Features
- Voiced to Edward Van Halens Amp used for recording and touring
- 120 Watts RMS
- Six 12AX7 preamp tubes
- Four 6L6GC power tubes
- HI and LO Gain Inputs
- 2 channel preamp
- PRE and POST gain Controls on both channels
- Bright & Crunch Switches
- 3-band EQ
- Presence and Resonance Controls
- Post-EQ effects loop
- Preamp output
- Footswitch included
|
|
